Your wishlist is empty
EXC80H/86Hxxx Controllerboard
The latest generation of controllers for demanding applications
The EXC80H/86Hxxx is a latest-generation PCAP controller. The controller is ideal for all industrial and medical applications and is available from stock in many board variants. It supports 10-finger operation and palm recognition, is water-resistant, can be operated in salt water, and offers maximum EMC properties.
- Up to 84"
- As a controller board or chip-on-tail
- Operable even through 10mm cover glass and with gloves
- Up to 10-finger operation
- Palm recognition
- Water resistant (water standing on the glass or rain is filtered out)
- Operable under salt water and conductive liquids (e.g., blood)
- SOC with 30V operating voltage for high EMC requirements:
- 50V/m radiated interference (RS) according to IEC61000-4-3 standard
- 10Vrms conducted interference (CS) according to IEC61000-4-6 standard
- Supports active and passive stylus pens: up to 4 active pens simultaneously
- Windows 8/10 certified
- Air gap between sensor and front glass possible (up to 0.3mm)
- Display can be placed directly behind the sensor (supports zero air-gapped structure)
- Operating temperature -40 to 85°C
- Interface: USB, RS232, I2C
- Resolution: 16384x16384
- Response time: Max. 25 ms
- Controller chip-on-flex
- Controller chip possible on ribbon cable (flex) of the touch sensor
- Free design of the flex cable in terms of position, length, and interface
The manufacturer EETI based in Taipei is a specialist for touchscreen controllers. Twelve years of experience in research and development of touchscreen solutions enable EETI to provide controller hardware and firmware for all mainstream touch technologies as well as software and drivers for all major operating systems. EETI touch solutions are projected capacitive, surface capacitive, resistive, surface acoustic wave and infrared, five of the most important touch technologies.
