In seinem 581-Pin BGA Gehäuse packt der Vortex86DX 32kb L1 cache, 256KB L2 cache, PCI rev. 2.1 32-bit/33MHz, DDR2-RAM-Controller, IPC (Internat PeripheralControllers mit DMA und Interrupt Timer/Counter inclusive), Fast Ethernet MAC, FIFO UART, USB 2.0 Host und IDE-Cntroller. Damit bietet er die optimaleLösung für Embedded-Systeme und Kommunikationsprodukte wie Thin Clients, NAT-Router, Home-Gateway, Access Points und Tablet-PCs.
- x86 32bit Processor Core
- Floating point unit support
- Embedded I/D Separated L1 Cache
- Embedded L2 Cache
- DDRII Control Interface
- IDE Controller
- LPC (Low Pin Count) Bus Interface
- MAC Controller x 1PCI Control Interface
- ISA Bus Interface
- DMA Controller
- Interrupt Controller
- Counter/Timers
- MTBF Counter
- Real Time Clock (Internal Mode or External Mode)
- FIFO UART Port x 5 (5 sets COM Port)
- Parallel Port
- General Chip Selector
- General Programmable I/O
- USB 2.0 Host Support
- USB 1.1 Host Support
- PS/2 Keyboard and Mouse Interface Support
- Redundant System Support
- Speaker out
- Embedded 2MB Flash
- I²C bus x 2Servo Control interface support
- General Shift interface support
- JTAG Interface supported for S.W. debugging
- Input clock
- 14.318MHz
- 32.768KHz
- Output clock
- 24 MHz
- 25 MHz
- PCI clock
- ISA clock
- DDRII clock
- Operating Voltage Range
- Core voltage: 1.2 V ~ 1.4V
- I/O voltage: 1.8V ± 5%, 3.3 V ± 10 %
- Operating temperature: -40 ~ 85°C
- Package Type: 27x27mm, 581 ball BGA
DMP Electronics Inc., ein Mitglied der DM&P Gruppe wurde 1989 gegründet und startete mit der Entwicklung industrieller Steuerungen. Seitdem konzentriert sich DMP auf die Entwicklung von Computer-on-a-Chip-Produkten auf X86-Basis. Der hohe Integrationsgrad, gepaart mit niedriger Verlustleistung, macht die Single Chip X86-Computer zum idealen Rechner für alle Anwendungen in Industrie, Mess- und Regelungstechnik, Medizin und Gebäudeautomation.
Eval Board Vortex86DX
Das Evaluation Board ist ein SBC (Single Board Computer) der perfekt auf das SoC (System-on-a-Chip) abgestimmt ist. Für Entwickler ist dieses Evaluation Board ideal, da zeitintensives Fehlersuchen und Konfigurieren von SBC und SoC entfällt. Die Performance des Prozessors mit den I/O-Schnittstellen kann sehr einfach geprüft werden.
Ferner bietet es als Referenzdesign eine ideale Vorlage für Ihre Entwicklung.
Der Kern des Boards beinhaltet den SoC und DDR2_RAM. Ebenso sind die I/O-Schnittstellen LAN, USB, RS232, GPIO, PS/2, Printer, IDE WDT, ISA und PCI integriert.